The U.S. Consumer Product Safety Commission, in cooperation withAmerican Tack & Hardware Co. Inc. (AmerTac), of Saddle River, N.J., today announced a voluntary recall of the LED Night Light.
An electrical short circuit in the night light can cause it to overheat and smolder or melt, posing fire and burn hazards to consumers. AmerTac has received 25 reports of the night lights smoking, burning, melting and charring. No injuries have been reported.
Three AmerTac night lights are being recalled. Each has a model name and two model numbers. The model name and a secondary model number appear only on the packaging. The basic model number appears on the back of the night light. The night lights are rectangular, about 2-3/16 inches high, 3-1/2 inches wide and 1-1/4 inches deep. The front housings for each are either white- or nickel-colored plastic with four horizontal vents and a round light sensor above the top vent. The backs of the night lights are gray plastic with the AmerTac™ logo, the basic model number, “SY” identification code and “ETL” molded into them. Only models bearing “SY” on the back are being recalled. The following night lights are being recalled:
|Model Name on Packaging
|Model Number on Packaging
|Model Number on Night Light
|71190 or 71190A
Around 227,000 of the units which were manufactured in China, were sold at hardware stores, home centers and lighting showrooms from March 2009 through October 2010 for about $6.
Consumers should immediately stop using the recalled night lights, remove them from the wall sockets and contact the firm for instructions on receiving a full refund.
For additional information, contact AmerTac at (800) 420-7511 between 8 a.m. and 5 p.m. CT Monday through Friday, or visit AmerTac’s website at www.recall-center.com or www.amertac.com
If you or someone you know has been injured by a defective product, contact the defective product lawyers at the Alexander Law Group for a free case evaluation or call 888.777.1776. All calls free and confidential.